Power & Communications
Backup power for your router, fibre ONT and digital phone
By CumbriaCQ · Updated and source checked
To keep a digital phone working in a power cut, you must power every necessary part of its connection: the fibre ONT or modem, router, any separate phone adapter and the telephone equipment itself. A battery beside the router is not enough if another essential box loses power. Even a complete home backup cannot guarantee that the external network remains available.
Ask the provider before buying equipment
Ofcom's current consumer guidance says that if you depend on your landline, your provider must make sure you can contact emergency services during a power cut. If you do not have a working mobile phone or reliable mobile signal, it must offer a free backup solution, such as a battery unit, lasting at least one hour. Explain your circumstances and ask what solution covers your actual installation.
This is not a universal entitlement to a free battery for anyone who wants continuous Wi-Fi, nor a promise of indefinite broadband. Some solutions may use mobile connectivity rather than keep every broadband function running. Ask what calls and equipment are supported, how long protection lasts, how to maintain it and what happens if an outage continues. Tell both your phone provider and equipment supplier about telecare, pendants, health alarms or other line-connected devices before a digital switchover; an ordinary telephone test does not prove a care alarm works.
Trace the complete equipment chain
- Fibre ONT: the optical network terminal is the powered fibre box, often on a wall away from the router. It converts the incoming optical connection for your home equipment. Do not disconnect or handle the fibre to test backup power.
- Modem or router: some services use one combined unit; others have a separate modem. The router may also provide the digital-phone service.
- Phone adapter: a separate analogue telephone adapter, if fitted, needs power too.
- Phone base or hub: a cordless handset having a charged battery does not help if its required base station is off. A handset paired directly to a powered provider hub is a different arrangement from a separate mains-powered base.
- Handset: keep cordless handsets charged. A supported corded phone plugged into the router's phone port may avoid a separate base supply, but the router and upstream equipment still require power.
- Other essential links: include any switch, Wi-Fi access point or other powered device actually used between the phone and router. A mains powerline adapter will not carry a connection through an unpowered installation merely because the router has a battery.
BT's battery-backup instructions explicitly require backing up the Openreach modem for full fibre as well as the hub. They distinguish older black backup units from Battery Back Up Plus and explain when separate units are required. Follow the instructions for your provider and model; one provider's cable set is not automatically compatible with another router.
Choose a supported supply
- Provider battery unit: ask whether it covers both the ONT and router, their physical separation and the phone arrangement.
- AC UPS: this can power the original mains adapters if its sockets, output, total rating and battery runtime suit them. Check both W and VA ratings, transfer behaviour and battery replacement arrangements.
- DC backup: it must match every device's voltage, polarity, connector and required current. A multi-output box may have a shared limit. Similar-looking plugs are not proof of compatibility.
- Portable power station: confirm small-load shutdown settings, automatic transfer behaviour and whether outputs remain enabled. Do not assume every advertised emergency-power mode keeps a router from restarting.
Retain supplied adapters and follow the provider's approved connection instructions. Do not splice cables or substitute a generic '12V' battery where a regulated, specifically rated supply is required. If the right output cannot be confirmed, ask the equipment provider rather than experimenting.
Estimate runtime for all the boxes
Use the combined measured average load if available. Adapter ratings are often maximum values, so they are useful compatibility checks but not measured consumption. Include the phone base and any essential switch, and allow for conversion losses and battery ageing.
Illustrative example: a router at 8W, an ONT at 5W and a separate phone base at 2W total 15W. A nominal 100Wh battery with an assumed 80% delivered-energy allowance provides 80Wh, or about 5.3 hours at that load. Eight hours would require 120Wh delivered, or 150Wh nominal at the same assumed allowance. These are calculated planning examples, not specifications or tests of your equipment. A UPS's own consumption, temperature, load variation and cutoff may change the result.
Use a manufacturer's runtime curve for the actual load when available and leave reserve. If the ONT and router use separate batteries, the connection fails when either essential supply runs out: you cannot simply add their runtimes.
Run a planned, ordinary-call test
- Charge the backup and label which equipment it supports.
- At a suitable time, follow the backup manufacturer's test procedure or safely switch off only its normal mains input as instructed. Do not remove protective connections or work inside mains equipment.
- Confirm that the ONT, router and required phone base stay powered. Check an ordinary outgoing and incoming call with someone who has agreed to help. Do not call 999 or 112 just to test.
- Check whether a restart occurs, whether calls recover automatically and whether a low-load timeout later turns an output off.
- Restore power, confirm recharging and record the test conditions. Arrange any telecare test with its supplier, and do not interrupt medically necessary equipment.
Plan for the network failing too
Your test demonstrates local equipment behaviour, not the endurance of exchanges, cabinets, mobile sites or your provider's wider network. Wi-Fi calling still needs a working broadband path. A power bank preserves a mobile's charge, not its signal.
Keep a charged mobile where feasible and write down other agreed contact options in your household communications plan. Ofcom notes that emergency mobile calls can use another network if one is available; it is not a promise of service where no usable network exists. Read which radio methods work without the internet for additional local communication options. Neither community radio nor Cumbria local RF coverage is a guaranteed route to emergency services.
Your next step
- Write a fallback communications plan
- Understand usable energy and power outputs
- Understand radio and internet dependencies
- Prepare the rest of your household
Explore Power & Communications · Ask the CumbriaCQ community
Sources and further reading
Source links were checked for this update. Official instructions and manufacturers’ guidance take precedence. How these guides are prepared.
Cumbria emergency contacts
Immediate danger or a life-threatening emergency? Call 999 or 112. CumbriaCQ is not an emergency service.
For NHS advice, police non-emergencies, power cuts, gas, water, flooding and help from either local council, use our Cumbria emergency contacts directory. It covers Cumberland and Westmorland and Furness.
